B000xxxx CryptoServer module SMOS
B00001xx SENS section
B0000100 Sensory write error
B0000101 Sensory read error
B0000102 Bad info type
B0000103 Error during memory allocation
B0000104 Sensory I/O error
B0000105 Corrupted Master Key
B0000106 Sensory error answer
B0000107 CryptoServer not in alarm state
B0000108 Sensory read timeout
B0000109 Alarm still present, can't reset
B000010A Controller: read timeout
B000010B Controller: bad command
B000010C Controller: bad address
B000010D Controller: bad data
B000010E Controller: bad CRC
B000010F Bad CRC in answer
B0000110 Invalid parameter
B0000111 Buffer size too small
B0000112 Invalid length of answer data
B0000113 Invalid job state
B0000114 Sensory controller is locked
B000013x Sensory Controller section
B0000130 unknown error code
B0000131 timeout
B0000132 bad command
B0000133 bad address
B0000134 bad data
B0000135 bad CRC
B0000136 I2C error
B0000137 currently busy
B00002xx device section
B0000201 notifies if an error occurs during operation
B0000202 device is used by another session
B0000203 illegal device name length or character set
B0000204 illegal mode of operation
B0000205 passed parameter illegal
B0000206 session handle not allowed
B0000207 corrupted data
B0000209 can't allocate memory space
B000020A no private module function
B000020B no serial device available
B00003xx serial device section
B0000301 bad handle
B0000302 device already open
B000030D read error on serial line
B000030E parameter to be modified is invalid
B0000310 invalid parameter value to set control of SL
B0000311 timeout while reading char from serial line
B0000312 parity error
B0000313 receiver over-run
B0000314 receiver frame error
B0000315 no data ready to read
B00005xx file section
B0000501 file system not initialized
B0000502 the file is already opened
B0000503 file name is not allowed
B0000504 invalid open mode
B0000505 the directory does not exist
B0000506 the file does not exist
B0000507 the file doesn't / already exists
B0000508 invalid parameter
B000050A the file isn't open for access mode
B000050B position offset not allowed
B000050C no more memory space available
B000050D no bad block table
B000050E invalid magic tag
B0000510 flash file device is still busy
B0000511 flash file device replies an error
B0000513 illegal page address
B0000514 page parity error
B0000515 file system is read only
B0000516 bad file handle
B0000517 file system full
B0000518 file table full
B0000519 file corrupted
B000051A different file systems
B000051B bad file system type, can't mount
B000051C too many bad blocks, giving up
B000051D detected bad block in flash file
B000051E bad flash page geometry
B000051F too many open file handles
B00006xx task section
B0000601 stack overflow
B0000602 stack corrupted
B0000603 buffer size to small
B0000604 memory allocation failed
B00007xx AUDIT section
B0000700 Audit file does not exist
B0000701 Audit files full
B0000702 File system full
B0000703 Buffer too small
B0000704 Memory allocation failed
B0000705 Invalid configuration item
B0000706 Configuration value out of range
B0000707 Invalid parameter value
B0000708 Invalid audit handle
B0000709 Audit configuration is locked
B000070A Audit file already exist
B00008xx MDL section
B0000801 Error during memory allocation
B0000802 Invalid input parameter
B0000803 module already exists
B0000804 module table full
B0000805 illegal parameter passed
B0000806 event not reached
B0000807 module not found
B0000808 can't write module to SDRAM directory
B0000809 bad signed licence file
B000080A can't read boot loader configuration file
B000080B SLF parameter not found
B000080C invalid MTC file
B000080D invalid MMC file
B000080E No MTC signature present
B000080F Config parameter not found
B0000810 Module does not match hardware type
B0000811 invalid MSC file
B0000812 MSC verification failed
B0000813 Function not supported
B0000814 Function not available
B0000815 corrupted module section
B0000816 loading library failed
B0000817 library has no start function
B0000818 a critical module is corrupt
B00009xx memory section
B0000901 illegal memory type
B0000902 corrupted memory structure
B0000903 buffer size too small
B0000904 bad memory address
B0000Axx string section
B0000A01 memory allocation failed
B0000Bxx Config section
B0000B01 memory allocation failed
B0000B02 invalid parameter
B0000B03 invalid handle
B0000B04 bad config file
B0000B05 section not found
B0000B06 item not found
B00010xx PCI section
B0001000 DMA timeout
B0001001 request canceled
B0001002 MBR read timeout
B0001003 MBR write timeout
B0001004 bad MBR command
B0001005 rx crc error
B0001006 function not implemented
B0001007 shutdown request received
B0001008 memory allocation failed
B0001009 bad sequence counter
B000100A read timeout
B000100B write timeout
B000100C block length error
B000100D socket error
B000100E bad state for receive
B000100F timeout
B00011xx RTC section
B0001100 RTC failed
B0001101 RTC not initialized
B0001102 Bad parameter
B00012xx TIME section
B0001201 invalid parameter
B0001202 invalid format
B00013xx CRYPT section
B0001301 Error during memory allocation
B0001302 Invalid input parameter
B0001303 Error reading master key
B0001304 no internal access to CS2 master key
B0001305 CS2 master key corrupted
B0001306 Error updating master key
B0001307 Function not supported
B0001308 Random number generator failed
B0001309 SHA-512 Known Answer Test failed
B0001310 Random number generator timeout
B0001311 Known answer test failed
B0001312 Random Number Generator is not initialized
B0001313 Given security strength not supported
B0001314 Max number of requested randombits per call exceeded
B0001315 Prediction resistance not supported for current handle
B0001316 Random Number Generator needs to be reseeded
B0002xxx COFF section
B0002001 relocation error (low 16 bits)
B0002002 relocation error (high 16 bits)
B0002003 relocation error (PC relative)
B0002004 relocation error (long)
B0002005 can't allocate memory
B0002006 bad number of section headers
B0002007 multiple BSS segments
B0002008 multiple CINIT segments
B0002009 missing data in segment
B000200A bad entry function
B000200B missing symbol table
B000200C bad relocation data
B000200D bad section number in relocation data
B000200E bad displacement in relocation data
B000200F bad symbol index in relocation data
B0002010 bad relocation type
B0002011 bad coff file header
B0002012 missing information in coff file
B0002013 BSS segment is not empty
B0002014 CINIT segment is not empty
B0002015 module does not match CPU type
B0002016 bad relocation target address
B0002017 symbol stack overflow
B0002018 relocation error (USTFLD)
B0002019 relocation error (XSTFLD)
B0002020 no section information available
B0002021 section is corrupted
B0002022 cinit section is invalid
B0003xxx USB section
B0003001 memory allocation failed
B0003002 invalid parameter
B0003003 USB not supported
B0003004 initialization of host controller failed
B0003005 device is not connected
B0003006 invalid device state
B0003007 timeout occurred
B0003008 NAK received
B0003009 protocol error
B000300A ID table is full
B000300B item not found
B000300C invalid data length
B00031xx transaction error
B00032xx libusb
B00050xx panic message
B0005001 Can't start bootloader (CRC)
B0005002 Can't start bootloader (SDRAM error)
B000500B PCI interface closed
B000500C memory corruption detected
B00053xx shutdown message
B0005306 High temperature
B000530A Alarm was reset
B000530E CryptoServer cleared
B0005344 CryptoServer halted
B001xxxx CryptoServer module FIPS140
B0010001 invalid module version
B0010002 illegal firmware module in FIPS mode
B0010003 missing approved module
B0010004 approved module initialization failed
B0010200 function called with invalid parameter
B0017000 Generic error
B0017001 Invalid parameter
B0017002 invalid module version
B0017003 missing approved module
B0017004 approved module initialization failed
B0017005 illegal firmware module in FIPS mode
B0017006 critical module not started in FIPS mode
B0030000 General error
B0030001 Bad input parameter
B0030002 Out of memory
B0030003 Bad length of key component(s)
B0030004 A buffer is too short
B0030005 File length mismatch
B0030006 Item not found
B004xxxx CryptoServer module POST
B0040010 Invalid parameter in utility section
B0040011 Invalid testid passed to post_selftest function
B0040070 known answer tests for (internally used only) utility functions failed
B0040071 known answer test for AES encrypt/decrypt failed
B0040072 known answer test for AES CBC-MAC failed
B0040073 known answer test for AES CMAC failed
B0040074 known answer test for AES GCM failed
B0040075 known answer test for AES GMAC failed
B0040076 known answer test for AES OFB failed
B0040077 pair-wise consistency test of ECDSA failed
B0040078 known answer test for ECC CDH failed
B0040079 known answer test of HASH failed
B004007A known answer test for HMAC failed
B004007B invalid parameter in algo test function call
B004007C known answer test for KDF_800108 failed
B004007D known answer test for RSA sign/verify failed
B004007E pair-wise consistency test for RSA encrypt/decrypt failed
B004007F pair-wise consistency test for DSA sign/verify failed
B0040080 known answer test of DES failed
B0040081 known answer test for RSA encrypt/decrypt failed
B0040082 known answer test for KDF ANSI X9.42 failed
B0040083 known answer test for KDF ANSI X9.63 failed
B0040084 known answer test for KDF NIST SP 800-56A failed
B0040085 known answer test for DH primitive failed
B0040086 known answer test for ECDSA TR03111 primitive failed
B0040087 known answer test for ECDH primitive failed
B0040088 known answer test for TLS1.2 KDF failed
B0040089 pair-wise consistency test for RSA sign/verify failed
B004008A known answer test for EdDSA failed
B004008B known answer test for X25519 failed
B004008C known answer test for PBKDF SP800-132 failed
B004008D known answer test for DSA failed
B004008E known answer test of ECDSA failed
B0040100 known answer test for cryptographic function failed
B006xxxx Bootloader
B0060000 invalid parameter
B0060001 item not found
B0060002 invalid item length
B0060003 buffer size too small
B006001x command section
B0060010 bad length within format string
B0060011 bad parameter structure
B0060012 bad format string
B0060013 bad format
B0060014 timeout occured
B0060015 command is not allowed
B0060016 invalid command header
B0060017 invalid command length
B0060018 invalid function code
B0060019 invalid sub-function code
B006001A invalid challenge
B006001B command is not allowed in FIPS mode
B006001C command not available in current configuration
B006003x module section
B0060031 invalid MTC Header
B0060032 no MTC signature present
B0060033 invalid MMC Header
B0060034 no MMC signature present
B0060035 MMC hash compare failed
B0060036 invalid MSC Header
B0060037 MSC hash compare failed
B0060038 no module info found
B006004x coff section
B0060040 invalid coff name
B0060041 invalid coff header
B0060042 invalid header magic
B0060043 invalid header size
B0060044 invalid section
B0060045 invalid relocation of section
B0060046 invalid run address
B0060047 invalid load address
B0060048 invalid section memory
B0060049 invalid opt header
B006004A invalid size
B006004B invalid address
B006004C invalid MTC
B006004D invalid entry point
B006004E invalid CPU type
B006004F invalid coff file
B006005x signature secture
B0060050 invalid pkcs1 padding
B0060051 hash compare failed
B006006x RSA section
B0060060 rsa result overflow
B0060061 modulus is zero
B0060062 modulus is smaller than operand
B006007x file section
B0060071 error formating flash file
B0060072 flash file formated succesfully, now looping forever
B0060073 Initialization of file system failed
B0060074 file already exists
B0060075 invalid filename
B0060076 invalid file type
B0060077 invalid file size
B0060078 file not found
B006007A file open error
B006007B file read error
B006007C file write error
B006007D file close error
B006008x PCI section
B0060080 timeout occured
B0060081 protocol error
B0060082 length error
B0060083 crc error
B0060084 buffer size too small
B0060085 invalid parameter
B006009x UID section
B0060090 bad CRC on UID
B0060091 UID not found
B0060092 Extended UID invalid
B00600Ax SL section
B00600A0 invalid device name
B00600A1 invalid handle value
B00600A2 device is not open
B00600A3 device is already in use
B00600A4 invalid parameter
B00600A5 invalid parameter value
B00600A6 timeout
B00600A7 invalid crc
B00600A8 overrun error
B00600A9 parity error
B00600AA framing error
B00600AB data compare failed
B00600Bx MSP BSL section
B00600B1 get version failed
B00600B2 sync failed
B00600B3 erase failed
B00600B4 login failed
B00600B5 write failed
B00600Cx JTAG section
B00600C0 invalid state
B00600C1 unexpected IDCODE
B00600Dx Flash section
B00600D0 timeout during flash operation
B00600D1 error reading flash id
B00600D2 erase failed
B00600D3 error reading flash page
B00600D4 error writing flash page
B00600D5 bad page data
B00600D6 invalid CRC
B00600Ex log section
B00600E0 log file does not exist
B00600Fx SDRAM section
B00600F1 data bus test failed
B00600F2 address bus test failed
B00600F3 device test failed
B0060100 NACK received
B0060101 timeout occured
B0060102 protocol error
B0060103 device error
B0060104 invalid parameter
B0060105 function not supported
B0060106 initialisation failed
B0060107 error connecting device
B0060108 error determining device state
B0060109 usb protocol error
B006011x flash file section
B0060111 no config page
B0060112 invalid flash size
B0060113 no bad block table
B0060114 invalid bad block table
B0060115 unable to store bad block
B0060116 page is not blank
B006012x i2c device section
B0060120 one parameter is wrong
B0060121 got no acknowledge after sending a byte
B0060122 device does not exist
B006013x XSVF section
B0060131 unknown error
B0060132 TDO mismatch
B0060133 TDO mismatch after max retries
B0060134 illegal command
B0060135 illegal state
B0060136 buffer overflow
B006014x SHA512 section
B0060140 SHA512 known answer test failed
B006015x NVRAM section
B0060150 timeout during nvram operation
B0060151 error reading nvram page
B0060152 error writing nvram page
B0060153 bad page data
B0060154 error reading flash id
B0060155 NVRAM not available in Bootloader mode
B00602xx MSP section
B0060201 data len for communication with msp too large
B0060299 timeout occurred
B00602A5 invalid command
B00602BD invalid address
B00602C3 invalid data
B00602DB invalid crc
B00604xx SPI section
B0060401 read timeout
B0060402 timeout waiting for receiver ready
B0060403 timeout waiting for MSP ready
B0060404 timeout waiting for MSP ready low
B0060405 timeout waiting for RRDY
B0060500 EXAR section
B0060501 timeout during pci cfg operation
B0060502 wrong data read
B0060503 pci interface for accelerator busy
B0060504 no exar accelerator found
B0060505 no marvell bridge found
B0060511 memory allocation failed
B0060512 invalid parameter
B0060513 invalid handle
B0060514 bad config file
B0060515 section not found
B0060516 item not found
B007001F Wrong Function Code  (included for backward compatibility)
B00Axxxx CryptoServer module HCE
B00A0001 memory allocation failed
B00A0002 PCI master access error (DSP)
B00A0003 key size not supported
B00A0004 exponent greater modulus
B00A0005 hardware engine timeout
B00A0006 result too big for buffer
B00A0007 illegal sizes of prime
B00A0008 data size too big (greater than modulus)
B00A0009 Self-test failed
B00A000A Module LNA not found
B00A000B PCI DMA master access error
B00A000C No driver module found
B00A000D Driver does not allow routing from HCE to driver.
B00A000E invalid parameter
B00A000F function is not supported
B00A0010 Signature verification failed
B00A0011 Result point is point at infinity
B00A0012 Unexpected result length (internal error)
B00A8xxx System error (errno)
B00Dxxxx CryptoServer module EXAR
B00D0001 no Marvell bridge detected
B00D0002 no Exar chip detected
B00D0003 invalid parameter
B00D0004 timeout
B00D0005 memory allocation failed
B00D0006 selftest failed
B00D0007 insufficient buffer size
B00D0008 invalid command state
B00D0009 invalid parameter length
B00D000A sign failed
B00D000B signature verification failed
B00D000C key size not supported
B00D000D data size too big
B00D0010 address error
B00D0011 ECC error
B00D0012 all engines are busy
B00D0020 PCI is busy
B00D0021 PCI timeout
B00D0022 PCI access error
B00Exxxx CryptoServer module HCE
B00E0001 memory allocation failed
B00E0002 PCI master access error (DSP)
B00E0003 key size not supported
B00E0004 exponent greater modulus
B00E0005 hardware engine timeout
B00E0006 result too big for buffer
B00E0007 illegal sizes of prime
B00E0008 data size too big (greater than modulus)
B00E0009 Self-test failed
B00E000A Module LNA not found
B00E000B PCI DMA master access error
B00E80xx hardware engine error
B068xxxx CryptoServer module CXI
B0680000 memory allocation error
B0680001 permission denied
B0680002 buffer size too small
B0680003 function not supported
B0680004 MBK firmware module not loaded
B0680005 invalid parameter tag
B0680006 invalid parameter length
B0680007 invalid parameter value
B0680008 invalid flags
B0680009 SFC is reserved for further use
B068000A an internal error occurred
B068000B invalid MBK key type
B068000C validity period has expired
B068000D SMOS version is too old
B068000E An internal computation overflowed
B0680010 property has to be absent
B0680011 unknown property
B0680012 property not found
B0680013 property already exists
B0680014 property is read-only
B0680015 property is protected
B0680016 invalid property tag
B0680017 invalid property value
B0680018 invalid property length
B0680019 property is sensitive
B068001A property doesn't match given template
B068001B property only valid for objects in a group
B0680020 invalid key algo
B0680021 invalid key size
B0680022 invalid key tag
B0680023 invalid key component
B0680024 invalid format of key blob
B0680025 invalid key type
B0680026 invalid mac of key blob
B0680027 invalid key name
B0680028 invalid key token
B0680029 missing key component
B068002A configuration only allows external keys
B068002B key export is denied
B068002C key import is denied
B068002D mechanism not allowed
B068002E invalid block length
B068002F illegal key usage
B0680030 invalid padding
B0680031 invalid mechanism
B0680032 invalid IV length
B0680033 signature verification failed
B0680034 invalid data length
B0680035 invalid mechanism parameter
B0680040 item not found
B0680041 invalid item tag
B0680042 invalid item length
B0680043 invalid item value
B0680044 invalid number of items
B0680050 invalid file size
B0680060 enumeration was aborted
B0680061 invalid input parameter
B0680062 external input objects not allowed
B0680063 Overwrite in this context not available
B0680070 callback not registered
B0680071 VDM mech not handled
B0680072 VDM cb produced more data than allocated
B0680073 VDM cb returns not expected state buffer
B0680074 VDM cb returns a zero length buffer
B0680075 Function can only be called from inside VDM cb
B0680080 key blob encrypted with different MBK
B0680081 wrong TBK passphrase for this key blob
B06801xx FIPS mode
B0680100 function not available in FIPS mode
B0680101 mechanism not supported in FIPS mode
B0680102 object type not available in FIPS mode
B0680103 algorithm not available in FIPS mode
B0680104 key size not allowed in FIPS mode
B0680105 clear text key import not allowed in FIPS mode
B0680106 clear text key export not allowed in FIPS mode
B0680107 key property invalid in FIPS mode
B0680108 Curve not available in FIPS mode
B0680109 Key usage is restricted in FIPS mode
B068010A External flag is required in FIPS mode
B0680110 initial FIPS usage must be set
B0680111 wrong padding mechanism set in FIPS mode
B06802xx SECURE
B0680200 decrypt property true not allowed
B0680201 encrypt property true not allowed
B0680202 always sensitive property false not allowed
B0680203 sensitive property false not allowed
B0680204 wrap property true not allowed
B0680205 cannot use public keys for wrapping
B0680206 check value missing or invalid
B06803xx CC mode
B0680300 function not available in CC mode
B0680301 mechanism not available in CC mode
B0680302 algorithm not available in CC mode
B0680303 padding mode not available in CC mode
B0680304 key size invalid in CC mode
B0680305 key property invalid in CC mode
B0680306 mechanism parameter invalid in CC mode
B0680307 external keys not available in CC mode
B0680308 too many key authorization failures
B0680309 key must be initialized before use
B068030A key must be authorized before use
B068030B key authorization failed
B068030C key authorization not supported for public keys
B068030D key is not blocked as expected
B068030E only secret and private keys can be assigned keys
B068030F assigned keys may not be copied, exported or imported
B0680310 overwrite flag not available in CC mode
B0680311 clear text import of secret/private keys not allowed in CC mode
B0680312 clear text export of secret/private keys not allowed in CC mode
B0680313 key is already initialized
B0680314 invalid signature over public key
B0680315 import/export of CSP/CNG secret/private keys not supported in CC mode
B0680316 Key usage is restricted in CC mode
B0680317 initial CC usage must be set
B0680318 Curve not available in CC mode
B0680319 authentication mandatory in CC mode
B06804xx KSV Counter
B0680401 maximum amount of signatures is reached
B071xxxx CryptoServer module KUU
B0710000 MDL: Feature or capability is not supported
B0710001 MDL: permission denied
B0710002 MDL: general invalid parameter or value
B0710003 MDL: too many scripts
B0710004 MDL: out of memory
B0710005 MDL: cannot create lua state
B0710006 MDL: buffer is not zeropadded
B0710007 MDL: buffer is not big enough
B0710008 MDL: illegal file name
B0710009 MDL: Script not found
B071000A MDL: Identifier is not C-style
B071000B MDL: A value in the _CONFIG of the script must be a string
B071000C MDL: A value in the _CONFIG of the script must be a integer
B071000D MDL: Automatic generation of name for database or auditlog failed
B071000E MDL: Script Code too big
B071000F MDL: Illegal Function Code
B0710010 MDL: Illegal Sub-Function Code
B0710011 MDL: Function Code in use
B0710012 MDL: Bad _CONFIG header (Unspecified cause)
B0710013 MDL: A size is out of the expected range.
B0710014 MDL: Stack did over or underflow during operation.
B0710015 MDL: The file (already) exists.
B0710016 MDL: The Cryptoscript container is not valid
B0710017 MDL: The source code in the container is too long
B0710018 MDL: Internal error while trying to get a challenge
B0710019 MDL: Version of command block not supported
B071001A MDL: Command block has illegal length
B071001B MDL: Challenge does not exists or does not match
B071001C MDL: Challenge request frequency too high
B071001D MDL: Invalid challenge
B071001E MDL: Database file may be inconsistent
B071001F MDL: MBK key not available
B0710020 MDL: The command version is not supported
B0710021 MDL: The AES GCM tag verification failed
B0710022 MDL: bad entry in registry DB
B0710023 MDL: Expected a hexadecimal digit
B0710024 MDL: The given key is not a valid RSA or EC key
B0710025 MDL: buffer is too long
B0710026 MDL: A character is not reabable (The character code is not within 0x20..0x7F)
B0710100 MDL: Syntax error in config: Illegal symbol
B0710101 MDL: Syntax error in config: Expected assignment symbol
B0710102 MDL: Syntax error in config: Expected brace symbol
B0710103 MDL: Syntax error in config: Expected square brackets symbol (superfluous comma?)
B0710104 MDL: Syntax error in config: Expected a string within quotation marks
B0710105 MDL: Syntax error in config: Illegal string constant
B0710106 MDL: Syntax error in config: Illegal c style identifier
B0710107 MDL: Syntax error in config: Illegal unsigned integer constant
B0710108 MDL: Error in config: SFC defined more than once
B0710109 MDL: Error in config: BKP Key defined more than once
B071010A MDL: Error in config: Name defined more than once
B071010B MDL: Error in config: Description defined more than once
B071010C MDL: Error in config: Version defined more than once
B071010D MDL: Error in config: Timeout defined more than once
B071010E MDL: Error in config: FC defined more than once
B071010F MDL: Error in config: SystemDB defined more than once
B0710110 MDL: Error in config: MaxSizeDB defined more than once
B0710111 MDL: Error in config: MaxSizeHeap defined more than once
B0710112 MDL: Error in config: KeyManager defined more than once
B0710113 MDL: Error in config/bkpkey: A string may only follow MOD or PEXP tags
B0710114 MDL: Syntax error in config: Exepected a brace or a string or integer constant
B0710115 MDL: Error in config: Changing key manager rights with global CXI database is not allowed
B0710116 MDL: Error in config: Tag must be a string and not be empty
B0710117 MDL: Error in config/backup key: MOD defined more than once
B0710118 MDL: Error in config/backup key: PEXP defined more than once
B0710119 MDL: Error in config/backup key: Illegal key length (too short or odd)
B071011A MDL: Syntax error in config: Expected a comma
B071011B MDL: Error in config: Illegal permissions for KEYM
B071011C MDL: Error in config: Name must be a c style identifier and must be shorter than 32 characters.
B071011D MDL: Error in config: Description must contain only readable characters and must be shorter than 128 characters.
B071011E MDL: Error in config: The name is too long
B071011F MDL: Error in config: The description is too long
B0710120 MDL: Error in config: A table may only follow SFC or BKPKEY tags. Or tag is neither SFC nor BKPKEY.
B0710121 MDL: Error in config: A string may only follow NAME or DESCRIPTION tags. Or tag is neither NAME nor DESCRIPTION.
B0710122 MDL: Error in config: A number may only follow VERSION, TIMEOUT, FC, FLAGSYSDB, MAXSIZEDB, MAXSIZEHEAP, KEYMANAGERPERM. Or tag is neither of these tags.
B0710201 MDL: First parameter of command buffer is invalid
B0710202 MDL: Second parameter of command buffer is invalid
B0710203 MDL: Third parameter of command buffer is invalid
B0710204 MDL: Fourth parameter of command buffer is invalid
B0710205 MDL: Fifth parameter of command buffer is invalid
B0710206 MDL: Sixth parameter of command buffer is invalid
B0710207 MDL: Seventh parameter of command buffer is invalid
B0710208 MDL: Eighth parameter of command buffer is invalid
B0710209 MDL: Nineth parameter of command buffer is invalid
B071020A MDL: Parameter number 10 of command buffer is invalid
B071020B MDL: Parameter number 11 of command buffer is invalid
B071020C MDL: Parameter number 12 of command buffer is invalid
B071020D MDL: Parameter number 13 of command buffer is invalid
B071020E MDL: Parameter number 14 of command buffer is invalid
B071020F MDL: Parameter number 15 of command buffer is invalid
B0712000 CryptoScript MDL and LIB
B0712001 MDL + LIB: Overflow or underflow during math. operation
B0714000 CryptoScript library (LIB)
B0714001 LIB: invalid parameter or value
B0714002 LIB: Action not allowed
B0714003 LIB: Invalid Object
B0714004 LIB: Out of memory
B0714005 LIB: Missing parameter
B0714006 LIB: More parameters given than needed
B0714007 LIB: Unsupported feature
B0714008 LIB: A size is out of the expected range.
B0714009 LIB: buffer is not big enough
B071400A LIB: A given length is out of acceptable range
B071400B LIB: Internal error. Inconsistency in big number
B071400C LIB: An index is out of range
B071400D LIB: Expected an int or a big number as parameter
B071400E LIB: Value must not be negative
B071400F LIB: Value must not be zero
B0714010 LIB: Value must not be odd
B0714011 LIB: Illegal hex character or digit
B0714012 LIB: Vault property with a given name doesn't exist
B0714013 LIB: Vault property with given index doesn't exist
B0714014 LIB: Vault buffer is out of space
B0714015 LIB: Vault buffer may be corrupt
B0714016 LIB: Property name is illegal, too long or currupt
B0714017 LIB: Type of property name is not convertible to string
B0714018 LIB: Property value is illegal or corrupt
B0714019 LIB: Type of property value is not convertible to string
B071401A LIB: Vault feature disabled when using SystemDB
B071401B LIB: Vault buffer is already loaded.
B071401C LIB: Invalid CXI mechanism: parameter
B071401D LIB: Invalid CXI mechanism: padding
B071401E LIB: Invalid CXI mechanism: mode
B071401F LIB: Invalid CXI mechanism: chaining
B0718000 LUA: Generic errors
B0718001 LUA: LUA_YIELD error
B0718002 LUA: LUA_ERRRUN error
B0718003 LUA: LUA_ERRSYNTAX error
B0718004 LUA: LUA_ERRMEM error
B0718005 LUA: LUA_ERRERR error
B081xxxx CryptoServer module VDES
B0810001 length of data is not a multiple of 8 bytes
B0810002 length of key is not 8, 16, or 24
B0810003 cannot allocate memory
B0810004 key is weak
B0810005 key is semi-weak
B0810006 two of the 8byte key parts are identical
B0810007 mode is unknown
B0810008 could not get local Master Key
B0810009 unknown padding mechanism
B081000A invalid padding
B081000B invalid parameter
B081000C key is possibly weak
B081000E Zero length not allowed
B082xxxx CryptoServer module PP, PIN pad driver
B0820001 timeout, or operation aborted by user
B0820002 command block too long
B0820003 timeout while writing to PIN pad
B0820004 answer buffer too small
B0820005 timeout while reading from PIN pad
B0820006 IO error
B0820007 connection not open
B0820008 invalid parameter
B0820009 bad RAPDU from smartcard
B082000A no smartcard in reader
B082000B bad PIN pad type specified
B082000C bad length of command block
B082000D protocol error
B082000E timeout while waiting for key input
B082000F timeout while waiting for card insertion
B0820010 bad repetition of PIN entry
B0820011 function is not supported
B0820012 invalid parameter
B0820013 access denied
B0820014 bad input
B0820015 no response from smartcard
B0820016 no supported smartcard reader connected
B0820017 not allowed in CC Endorsed Mode
B0820018 SMOS version not supported
B0820019 communication error with PinPad daemon
B0820020 PinPad currently in use by other cHSM
B08201xx PIN pad error
B08202xx CCID Error
B0828xxx System error (errno)
B083xxxx CryptoServer module CMDS, Command scheduler
B0830001 permission denied
B0830002 can't alloc memory
B0830003 invalid parameter
B0830004 module id already in use
B0830005 bad function code (module ID)
B0830006 function doesn't exist
B0830007 invalid user name
B0830008 illegal length of command block
B0830009 can't create task
B083000A bad tag of command block
B083000B bad length within format string (scanf)
B083000C bad format of command block
B083000D bad parameter structure (scanf)
B083000E bad format string (scanf)
B083000F user already exists
B0830010 invalid mechanism
B0830011 no DB module present
B0830012 invalid AUTH layer command
B0830013 authentication failed
B0830014 no VRSA module present
B0830015 bad permission mask
B0830016 unknown user
B0830017 bad user attributes
B083001B logoff failed
B083001C logged in user can't be deleted; deprecated - should be removed in the future
B083001D bad user token (key or password)
B083001E no VDES module present
B083001F no UTIL module present
B0830020 no HASH module present
B0830021 secure messaging failed
B0830022 secure messaging session expired
B0830023 invalid secure messaging ID
B0830024 internal buffer overflow
B0830025 FIPS140 initialization failed
B0830026 mode does not match user
B0830027 invalid mode
B0830028 illegal answer buffer size
B0830029 no MBK module present
B083002A invalid backup data
B083002B bad entry in user DB (internal error)
B083002C buffer size too small
B083002D no MBK key found
B083002E MBK type does not match
B083002F no AES module present
B0830030 no HMAC algorithm available
B0830031 no ECC algorithm available
B0830032 ALARM state
B0830033 bad file 'init.key'
B0830034 One Admin authenticated via keyfile or smartcard must remain
B0830035 user flag not allowed
B0830036 permissions of users of same session must not differ
B0830037 error accessing NVRAM
B0830038 too many unsuccessful authentication tries
B0830039 parameter not valid in FIPS mode
B083003A authentication mandatory in FIPS mode
B083003B mechanism not allowed in FIPS mode
B083003C user attributes not allowed in FIPS mode
B083003D user flag not allowed in FIPS mode
B083003E maximum of logged in/authenticated users reached
B083003F authentication without secure messaging not allowed in FIPS mode
B0830041 authentication not available in FIPS error state
B0830042 function not available in FIPS mode
B0830044 function is blocked in Administration Mode
B0830045 authentication protocol version not supported in FIPS mode
B0830046 file for MaxAuthFailures corrupted
B0830047 function not available in error state
B0830050 static login not allowed in CC mode
B0830051 authentication not available in CC error state
B0830052 function not available in CC mode
B0830053 function not available in CC error state
B0830054 CC-CMS initialization failed
B0830055 permissions must not overlap in CC mode
B0830056 cc-cms.msc module missing in flash
B0830057 password length/key size not CC compliant
B0830059 parameter not valid in CC mode
B083005A authentication mandatory in CC mode
B083005B mechanism not allowed in CC mode
B083005C user attributes not allowed in CC mode
B083005D user flag not allowed in CC mode
B083005F authentication without secure messaging not allowed in CC mode
B0830060 DH parameter from host for sessionkey is weak
B0830061 This function is not available in this HSM configuration
B0830062 wrong version of HASH module
B0830063 illegal challenge length requested
B0830064 Mutual Authentication not available in alarm state
B0830065 requested Secure Messaging mode not supported anymore
B0830066 user's authentication mechanism not supported anymore
B0830067 Static Login not supported anymore
B0830068 unknown key type requested for mutual authentication
B0830069 authentication protocol version not supported
B0830070 Mutual Authentication must be activated in CC mode
B0830071 user permission level must not exceed 3 in CC mode
B0830072 secure messaging session is closed
B0830073 firmware module required for CC mode is missing
B0830074 firmware module required for CC mode failed to initialize
B0830075 firmware module has incorrect version for CC mode
B0830076 requested HSM authentication method not supported
B0830077 certificate for HSM authentication key missing
B0830078 invalid combination of Secure Messaging handshake and mechanism
B0830079 invalid curve ID for ECDH handshake
B0830080 certificate is invalid or in wrong format
B0830081 user temporarily blocked due to failed auth attempt
B0830082 The specified user credentials are already in use by the specified user
B0830090 password length/key size not FIPS-compliant
B0830091 The user credentials need to be updated
B0830092 command buffer is malformed
B0830093 command version not supported
B0830094 host side version is deprecated
B08300A0 item not found
B08300A1 invalid item tag
B08300A2 invalid item length
B08300A3 invalid item value
B08300A4 invalid number of items
B084xxxx CryptoServer module VRSA
B0840001 cannot allocate memory
B0840002 buffer for result is to small
B0840003 bad raw data value
B0840004 modulus is not p * q
B0840009 u is not (1/q) mod p
B084000A dp is not d mod (p-1)
B084000B dq is not d mod (q-1)
B084000C byte string is not a keytoken
B084000D component is not a member of this key token
B084000E component is already a member of this key token
B084000F value for flags is invalid
B0840010 Invalid hash algorithm
B0840011 Signature verification failed
B0840012 Key length too small
B0840013 Value of pq_diff is too large
B0840014 modulus to small
B0840015 bad key components P and Q
B0840016 data size is different from modulus size
B0840017 missing component in key token
B0840018 invalid parameter
B0840019 gcd(p-1,e) != 1 or gcd(q-1,e) != 1
B084001A d * e != 1 mod (p-1)(q-1)
B084001B function obsolete
B084001C key generation failed
B084001D invalid blinding value
B084001E blinding value generation failed
B084001F PKCS#1 decryption failed
B0840020 invalid public exponent
B0840021 bad length of key token
B0840022 PKCS#1 encoding error
B0840023 The pairwise consistency test failed !
B0840024 Function is not available
B0840025 Blinding mechanism unknown
B0840026 input buffer length too small
B0840027 Token structure is inconsistent
B0840100 bad key token in command string
B0840101 random number request does not match (FIPS test)
B085xxxx CryptoServer Module SC
B0850001 Bad Length of Application Name
B0850002 Card Error from "select" Command
B0850003 Card Error from "internal auth." Command
B0850004 Wrong SM Key
B0850005 Card Error from "ver. passw." Command
B0850006 Card Error from "mse" Command
B0850007 Card Error from "read record" Command
B0850008 Bad Record Length
B0850009 Record not Found
B085000A File not Found
B085000B Access Denied
B085000C Bad Parameter: SFI, REC#
B085000D Bad Data Length
B085000E Bad Tag for SM
B085000F Card Error from "update record" Command
B0850010 Card Error from "chg. passw." Command
B0850011 Password file not found
B0850012 Bad Personalization Data
B0850013 Card Error while Personalizing
B0850014 Card Error from "get sessionkey" Command
B0850015 Application not Found
B0850016 Card Error from "read binary" Command
B0850017 Bad PIN Length
B0850018 Memory Allocation Error
B0850019 Card Error from "pso" Command
B085001A Bad Certificate Format
B085001B Card Error from "get data" Command
B085001C Unknown Application Type
B085001D This action is not implemented by the detected card type
B085001E Invalid Pin
B085001F Signing Supported until 48 Byte (Possible Hashes md5, ripemd160, sha1, sha224)
B0850020 Wrong Command for Card Application
B0850021 Hash Size Bigger than 40% of the Key Size
B0850022 Card not Opened Before or Unknown Card
B0850023 Command does not exist
B086xxxx CryptoServer module UTIL
B0860001 Error opening RTC Device
B0860002 RTC: IOCTL Error
B0860003 RTC: Read Error
B0860004 RTC: Write Error
B0860005 Error closing RTC Device
B0860006 Wrong Time Format
B0860007 Null Pointer given
B0860008 File Open Error
B0860009 File Read Error
B086000A File Close Error
B086000B Null Pointer given
B086000C Random Number Generator failed
B086000D Error allocating Memory
B086000E invalid argument
B086000F function not supported
B0860010 Known answer test failed
B0860011 Random Number Generator is not initialized
B0860012 Bad Parameter
B0860013 Given security strength not supported
B0860014 Max number of requested randombits per call exceeded
B0860015 prediction resistance not supported for current handle
B0860020 RTC has lost power
B0860021 RTC is not initialized (RTC has to be set)
B0860030 Computation overflow (internal error)
B086FC00 SMOS Version does not match
B087xxxx CryptoServer module ADM
B0870001 file open error
B0870002 file read error
B0870003 file write error
B0870004 file close error
B0870005 file (module) does not exist
B0870006 wrong filename syntax
B0870007 no module info found
B0870008 file not found
B087000A no modules version found
B087000B wrong command data length
B087000C unable to open i2c device
B087000D unable to read i2c device
B087000F permission denied
B0870011 file size exceeds limit
B0870012 bad signature
B0870013 no UTIL module present
B0870014 memory allocation error
B0870015 function not supported
B0870016 invalid crc
B0870017 invalid size
B0870018 bad MMC format
B0870019 no HASH module present
B087001A no VRSA module present
B087001B no DB module present
B087001C no AES module present
B087001D module decryption failed
B087001E invalid key type
B087001F invalid parameter
B0870020 invalid file type
B0870021 invalid item length
B0870022 item not found
B0870023 no MBK module present
B0870024 no MBK key available
B0870025 cannot allocate memory
B0870026 cannot allocate secure memory
B0870027 export of MBK database not allowed
B0870028 invalid MBK value (valid: 0 (DES), 1 (AES))
B0870029 given MBK type differs to stored MBK with the highest priority
B087002A given MAC differs to calculated MAC
B087002B given DB index differs to original DB index
B087002C import of database session.db not allowed
B087002D export of database session.db not allowed
B087002E import of MBK database not allowed
B087003x module section
B0870030 invalid MTC header
B0870031 invalid MMC header
B0870032 invalid MSC header
B0870033 invalid MSC header
B0870034 invalid SLF header
B0870035 no module info found
B0870036 MTC doesn't contain signature
B0870037 invalid MMC hash
B0870038 can't decrypt firmware module
B0870039 invalid SCF header
B087004x key section
B0870040 key is corrupted
B0870041 the loaded key is not valid in format or size
B087005x cfg section
B0870051 could not retrieve version of requested module
B0870052 requested module is too old, does not yet support cfg
B0870053 unknown module, unknown how to cfg
B0870054 loading of an Alternative Module Signature Key is blocked
B087006x FIPS section
B0870061 evaluation of FIPS mode has gone wrong
B0870062 virtual error code for restricted FIPS mode
B0870063 function not available in FIPS mode
B0870070 function not available in CC mode
B0870080 import of authentication key database not allowed
B0870081 export of authentication key database not allowed
B0870082 import of database KUUREG.db not allowed
B0870083 export of database KUUREG.db not allowed
B0870084 restore of database user.db not allowed
B0870085 backup of database user.db not allowed
B087009x Signed Audit Log section
B0870091 auditkey.db should be created but already exists, user has to delete it before
B0870092 ClearAuditLogFiles did not delete files, because the hash does not fit to latest log files hash
B0870093 SMOS version is too old
B0870094 unknown Signed Audit Log mode
B0870100 invalid command version
B0870101 malformed command db backup item
B0870102 invalid db backup blob item
B0871000 function not supported on cHSM
B088xxxx CryptoServer Database Module
B0880001 memory allocation failed
B0880002 bad master encryption key
B0880003 no space in database
B0880004 record not found
B0880005 record already exists
B0880006 no space in cache
B0880007 corrupted database file
B0880008 record CRC / authentication tag error
B0880009 bad database name
B088000A bad database handle
B088000B bad file type of database file
B088000D bad info structure
B088000E database in use
B088000F bad data length
B0880011 database handle confused
B0880012 internal inconsistency
B0880013 SMOS version is too old
B0880014 Bad parameter (e.g. NULL pointer)
B0880015 Arithmetic computation resulted in an overflow
B0880016 A buffer is too small
B0880017 record corrupt
B0881000 bad length of command block
B0881001 io error on database file
B0881002 test database not open
B0881003 db handle corrupted
B0881004 db node corrupted
B0881005 db cache corrupted
B0881006 db modification failed due to read only mode
B089xxxx CryptoServer module HASH
B0890001 Memory Error
B0890002 Illegal Parameter
B0890003 Illegal Length
B0890004 Illegal Mode
B0890005 Function not supported
B0890007 Hash algorithm not supported
B08Axxxx CryptoServer module STUN, secure tunnel
B08A0001 tunnel has been shutdown
B08A0002 can't alloc memory
B08A0003 read error
B08A8xxx Secure Messaging library
B08A8002 can't alloc memory
B08A8003 invalid parameter
B08A8008 illegal length of command block
B08A800C bad format of command block
B08A8010 invalid mechanism
B08A8021 secure messaging failed
B08A8027 invalid mode
B08A802C buffer size too small
B08A803B mechanism not allowed in FIPS mode
B08A8060 DH parameter from host for sessionkey is weak
B08A8065 requested Secure Messaging mode not supported anymore
B08A8078 invalid combination of Secure Messaging handshake and mechanism
B08A8079 invalid curve ID for ECDH handshake
B08Bxxxx CryptoServer module AES
B08B0001 length of data is not a multiple of 16 bytes or the length of a data buffer is too big
B08B0002 length of key is not 16, 24, or 32
B08B0003 cannot allocate memory
B08B0004 mode is unknown
B08B0005 For cfb1 decryption the key must always prepared for encryption
B08B0006 unknown padding mechanism
B08B0007 invalid padding
B08B0008 invalid parameter
B08B0009 could not get local Master Key
B08B000A mode of prepared key does not match mode parameter
B08B000C Zero data length is not allowed
B08B000D Overflow of block counter in CTR chaining mode
B08B000E Tag verification on CCM/GCM decrypt failed
B08B000F Verification AES keywrap/-unwrap failed
B08Dxxxx CryptoServer module DSA
B08D0001 cannot allocate memory
B08D0002 prime P is too small
B08D0003 prime Q is too small
B08D0004 domain parameter generation failed
B08D0005 invalid generator value G
B08D0006 bad primes P and Q
B08D0007 byte string is not a keytoken
B08D0008 component is not a member of this token
B08D0009 component is already a member of this token
B08D000A value for flags is invalid
B08D000B wrong hash value length
B08D000C private and public key do not correspond
B08D000D invalid parameter
B08D000E bad public key
B08D000F bad private key
B08D0010 bad length of key token
B08D0011 signature verification failed
B08D0012 bad format of signature
B08D0013 no ASN.1 module loaded
B08D0014 buffer for result is to small
B08D0015 pairwise consistency check failed on keygen
B08D0018 Zero length not allowed
B08D0023 prime Q is too big
B08D0030 The function called is no longer supported
B08D0031 data size too big (greater than modulus)
B08D0100 bad key token in command string
B08Exxxx CryptoServer module LNA
B08E0001 result overflow
B08E0002 result negative
B08E0003 modulus too short
B08E0004 data greater than modulus
B08E0005 can't alloc memory
B08E0006 exponent is 0
B08E0007 division by zero
B08E0008 number too short
B08E0009 bad parameter
B08E000A no prime found
B08E000B modulus is even
B08E000C Bad blinding type
B08E0100 result overflow
B08E0101 bad argument length
B08E0102 internal error while generating prime
B08Fxxxx CryptoServer module ECA
B08F0001 can't alloc memory
B08F0002 not supported
B08F0003 bad parameter
B08F0004 curve not found
B08F0005 curve already registered
B08F0006 input number too big
B08F0007 point at infinity
B08F0008 incompatible precalculated point
B08F0009 bad length of argument
B08F000A bad tag of point
B08F000B no square root found
B08F000C non-residue could not be found
B08F000D no ASN.1 module found
B08F000E error decoding ASN.1 EC domain parameter
B08F000F bad value of EC point
B08F0010 bad value of EC domain parameter
B08F0011 EC domain parameters differ
B08F0012 invalid domain parameter
B08F0013 invalid irreducible polynomial
B08F0016 Curve not secure for CC standards
B08F0017 table of precalculated values empty/inconsistent
B08F0018 division by zero
B08F0019 inverse doesn't exist
B08F0101 bad argument length
B08F0102 internal error
B08F0103 function obsolete
B091xxxx CryptoServer module ASN1
B0910001 Memory Error
B0910002 Parameter flag is incorrect
B0910003 ASN1_ITEM table overflow
B0910004 bad ZKA format
B0910005 ASN1 data overrun
B0910006 tag too big
B0910007 indefinite length not supported
B0910008 length field too big
B0910009 internal stack overflow
B091000A item not found
B091000B ASN1 buffer overflow
B091000C bad value of 'nitems' in ITEM table
B091000D zero tag
B091000E bad PKCS#1 format
B091000F decoding error
B0910010 calculated size exceeds given datasize
B096xxxx CryptoServer module MBK
B0960001 Parameter mismatch
B0960002 MBK database is suspended
B0960003 Unexpected null pointer
B0960004 Permission denied
B0960005 ISO hash check of key failed
B0960006 Key types do not match
B0960007 Key generation date does not match
B0960008 Key generation time does not match
B0960009 Key names do not match
B096000A Verify of existing master key failed
B096000B Slot is empty
B096000C Slot number not valid
B096000D Record number not valid
B096000E Key length not valid
B096000F Wrong format in time structure detected
B0960010 BCD coded time length mismatch
B0960011 No key name or NULL pointer for key name
B0960012 Action canceled by user
B0960013 Invalid mode for AES key passed
B0960014 Both versions of the MBK database exists
B0960015 External parameter already set from extern and overwrite flag is not set
B0960016 The AES Module is not available
B0960017 Invalid key type
B0960018 memory allocation failed
B0960019 bad database format
B096001A smartcard record is empty
B096001B smartcard only contains empty records
B096001C unable to require semaphore
B096001D maximum numbers of key exchange keys reached
B096001E invalid flags value
B096001F info length not valid
B0960020 key already exists
B0960021 invalid length of key share
B0960022 invalid number of key shares
B0960023 the ECA module is not available
B0960024 number of key shares doesn't match
B0960025 invalid key ID
B0960026 multiple occurrences of same key ID
B0960027 no kek found with given hash
B0960028 function is not supported
B0960029 no PIN pad module found
B096002A no smartcard module found
B096002E The length of a parameter is wrong
B096002F A computation overflowed or underflowed
B0960030 The database is full
B0960031 Function not available (Auto-MBK). Import your own MBK before use.
B097xxxx CryptoServer module DIAG
B0970001 function undefined in SMOS version
B09Axxxx CryptoServer module NTP
B09A0001 NTP: Command with invalid data length
B09A0002 NTP: requested time delay too big
B09A0003 NTP: daily time delay exceeded
B09A0004 NTP: old function call; use new one
B09A0005 NTP: negative time set; use flag to set backward
B09A0006 NTP: ntp module is not activated
B09A0007 NTP: database error
B09A0008 NTP: permission denied
B09Cxxxx CryptoServer module ECDSA
B09C0001 cannot allocate memory
B09C0002 null component in signature (r,s)
B09C0003 value for flags is invalid
B09C0004 private and public key do not correspond
B09C0005 bad public key
B09C0006 bad private key
B09C0007 signature verification failed
B09C0008 bad format of signature
B09C0009 no ASN.1 module loaded
B09C000A buffer for result is to small
B09C000B malformed ASN.1 coded key pair
B09C000C bad parameter
B09C000D mac check of ecies encrypted data failed
B09C000E no AES module loaded
B09C000F pairwise consistency check failed on keygen
B09C0010 Zero length not allowed
B09C0011 secure mode of curve not available
B09C0012 count of signatures per command exceeds limit
B09C0013 bad hash algorithm
B09C0014 bad MAC1 mac/digest length (<4 or >default)
B09C0015 No default length for hash algorithm (SHAKE*)
B09C0016 bad input parameter
B09C0017 memory size mismatch
B09C0018 not supported
B09C0019 function obsolete
B09C001A all-zero result
B09C001B key generation failed
B0A0xxxx CryptoServer module ADK
B0A00001 can't alloc memory
B0A00002 missing parameter
B0A00003 invalid key slot
B0A00004 slot has no certificate
B0A00005 slot has no key
B0A00006 invalid hash algorithm
B0A00007 invalid parameter
B0A00008 could not get signature from host
B0A10000 *< OSCCA general error
B0A10001 *< cannot allocate memory
B0A10002 *< invalid parameter
B0A10003 *< invalid key token
B0A10004 *< invalid mechanism
B0A10005 *< null component in signature (r,s)
B0A10006 *< private and public key do not correspond
B0A10007 *< bad public key
B0A10008 *< bad secret key
B0A10009 *< signature verification failed
B0A1000A *< bad format of signature
B0A1000B *< Zero length not allowed
B0A1000C *< buffer for result is to small
B0A1000D *< IV must be zero after first call
B0A1000E *< Current aad length must be a multiple of 128 bits
B0A1000F *< Message hat been started, AAD is finished yet
B0A10010 *< MAC verification failed
B0A10011 *< internal error occurred
B0A10012 *< not supported
B0A10013 *< internal memory error
B0A3xxxx CryptoServer module LATTICE
B0A30001 Cannot allocate memory
B0A30002 Invalid parameter value in 'flags'
B0A30003 Invalid parameter value in 'key_type'
B0A30004 Length of output buffer is too small
B0A30005 Invalid seed length or seed not set
B0A30006 Invalid key length
B0A30007 Invalid parameter
B0A30008 Invalid signature
B900xxxx CryptoServer API
B90000xx CryptoServer API core functions
B9000000 bad tag in data block
B9000001 invalid handle
B9000002 invalid argument
B9000003 can't alloc memory
B9000004 malformed protocol stack
B9000005 data block too big
B9000007 bad V24 device
B9000008 bad V24 parameter
B9000009 can't calculate block length
B900000A empty command block
B900000B malformed answer block from CSLAN
B900000C can't set V24 device
B900000D V24 mode not activated
B900000E V24 crc error on read
B9000010 bad length within format string (scanf)
B9000011 bad format of command block
B9000012 bad parameter structure (scanf)
B9000013 bad format string (scanf)
B9000014 cs_scanf not supported
B9000015 CSAPI handle still in use
B9000016 can only use multicast for CSLScanDevices
B9000017 slot is in invalid status and must be closed
B90002xx command layer CMDS for CryptoServer
B9000200 length error of answer block
B9000201 bad length of command data
B9000202 missing parameter structure
B9000203 bad tag of answer block
B90004xx authentication layer for CryptoServer
B9000400 length error of answer block
B9000401 invalid function code
B9000402 malformed answer block
B9000403 invalid authentication mechanism
B9000404 error in hash function
B9000405 error in signature function
B9000406 error in HMAC function
B90006xx secure messaging layer for CryptoServer
B9000600 length error of answer block
B9000601 malformed answer block
B9000602 invalid SM mechanism
B9000603 zero length data
B9000604 en- / decryption / MAC error
B9000605 secure messaging unwrap error
B9000606 internal error in SM lib
B901xxxx CryptoServer API LINUX
B9010001 path name too long
B9010002 bad port number
B9010003 bad IP address
B9010004 bad host name
B9010005 connection terminated by remote host
B9010006 can't alloc memory
B9010007 timeout occurred
B9010008 invalid argument
B9010009 no space for sockaddr (internal error)
B901000A bad block size received
B901000B no ready message from CMDS
B901000C cs2 exceeds critical temperature
B901000D error on /proc file
B901000E can't stat device file
B901000F buffer size too small
B9011xxx can't open device
B9012xxx can't create socket
B9013xxx can't get connection
B9014xxx error while polling
B9015xxx read error
B9015701 timeout
B9015706 operation interrupted by reset
B9015707 high temperature
B901570A CryptoServer halted
B901570B panic message from CryptoServer
B9016xxx write error
B9016701 timeout
B9016703 request rejected by CS2
B9016706 operation interrupted by reset
B9016707 high temperature
B901670A CryptoServer halted
B901670B panic message from CryptoServer
B9017xxx ioctl error
B9017701 timeout
B9017706 operation interrupted by reset
B9017707 high temperature
B901770A CryptoServer halted
B901770B panic message from CryptoServer
B901773x reset of CryptoServer failed
B9018xxx ioctl error (locking)
B9018706 operation interrupted by reset
B9019xxx tcp receive error
B901Axxx tcp send error
B902xxxx CryptoServer API Windows
B9020001 path name too long
B9020002 bad port number
B9020003 bad IP address
B9020004 bad host name
B9020005 connection terminated by remote host
B9020006 can't alloc memory
B9020007 timeout occurred
B9020008 invalid argument
B9020009 no space for sockaddr (internal error)
B902000A bad block size received
B902000B no ready message from CMDS
B902000C cs2 exceeds critical temperature
B9020010 invalid parameter
B9020011 invalid handle value
B9020013 error creating mutex
B9020014 unable to set lock
B9020015 timeout while waiting for mutex
B9020016 no valid mutex object
B90201xx tcp: can't open device
B90202xx tcp: can't create socket
B90203xx tcp: can't get connection
B90204xx tcp: error while polling
B90204F0 can't get connection
B90205xx tcp: read error
B90206xx tcp: write error
B90207xx tcp: init error
B90208xx tcp: ioctl error
B9021xxx dci: can't open device
B9022xxx read error
B9022001 read returned wrong length
B90220B5 read timeout
B9022706 operation interrupted by reset
B9022707 high temperature
B902273x reset failed
B9023xxx dci: write error
B9023001 write returned wrong length
B90230B5 write timeout
B9023706 operation interrupted by reset
B9023707 high temperature
B902373x reset failed
B9024xxx dci: ioctl error
B9024001 no ready message from CMDS
B90240B5 ioctl timeout
B9024706 operation interrupted by reset
B9024707 high temperature
B902473x reset failed
B9025xxx mutex section
B9028xxx tcp: startup error
B9029xxx tcp: address error
B902Axxx tcp: can't create socket
B902Bxxx tcp: can't get connection
B902B03C connection attempt timed out
B902B03D connection attempt refused
B902Cxxx tcp: error on select
B902Dxxx tcp: receive error
B902Exxx tcp: send error
B902Fxxx tcp: ioctl error
B9030xxx TLS config error
B9030001 context init error
B9030002 tls RFC8446 configuration error
B9030003 client tls certificate not found
B9030004 client tls key not found
B9030005 tls verify bundle file not found
B9030006 bad certificate file format
B9030007 bad key file format or wrong encryption key
B9031xxx client tls protocol error
B9031001 The TLS/SSL peer has closed the connection
B9031002 SSL_ERROR_SYSCALL Some non-recoverable, fatal I/O error occurred
B9031003 SSL_ERROR_SSL A non-recoverable, fatal error in the SSL library occurred
B904xxxx yacl library
B90400xx DES module
B9040000 length of DES key is neither 8 nor 16 nor 24 bytes
B9040001 length of input data is not a multiple of 8
B9040013 invalid irreducible polynomial
B90401xx RSA module
B9040100 effective length of result is greater
B9040101 effective length of on input operand
B9040102 result of subtraction would be negative
B9040103 divisor/modulus is zero with division
B9040104 operand for 'esm' is greater than modulus
B90402xx Long Number Arithmetic
B9040201 result overflow
B9040202 result negative
B9040203 modulus too short
B9040204 data greater than modulus
B9040205 can't alloc memory
B9040206 exponent is 0
B9040207 division by zero
B9040208 number too short
B9040209 bad parameter
B904020A no prime found
B904020B modulus is even
B90403xx RSA functions
B9040301 cannot allocate memory
B9040302 buffer for result is to small
B9040303 data size too big (greater than modulus)
B9040304 modulus is not p * q
B9040305 p is greater than q
B9040306 u is not (1/q) mod p
B9040307 dp is not d mod (p-1)
B9040308 dq is not d mod (q-1)
B9040309 gcd(p-1,e) != 1 or gcd(q-1,e) != 1
B904030A d * e != 1 mod (p-1)(q-1)
B904030B Key length too small
B904030C modulus to small
B904030D bad key components
B904030E invalid parameter
B904030F key generation failed
B9040310 Invalid hash algorithm
B9040311 Signature verification failed
B9040312 PKCS#1 decryption failed
B9040313 PKCS#1 encoding error
B9040314 invalid public exponent
B9040315 Value of pq_diff is too large
B90404xx SAFER module
B9040400 length of SAFER-Key is not 8 or 16
B9040401 length of input data is not a multiple of 8
B90405xx Pseudo Random Number Generator
B9040501 Null pointer in argument
B9040502 Wrong length of seed
B9040503 Can't auto initialize rnd generator
B90406xx AES module
B9040600 length of AES-Key is not 16, 24 or 32
B9040601 length of input data is not a multiple of 16
B9040602 bad input parameter (eg. NULL pointer not allowed)
B90408xx ASN1 module
B9040821 Memory Error
B9040822 Parameter flag is incorrect
B9040823 ASN1_ITEM table overflow
B9040824 Component flag is not defined
B9040825 ASN1 data overrun
B9040826 tag too big
B9040827 indefinite length not supported
B9040828 length field too big
B904082A item not found
B904082B ASN1 buffer overflow
B904082C bad value of 'nitems' in ITEM table
B904082D zero tag
B904082F decoding error
B9040830 calculated size exceeds given datasize
B90409xx Hash module
B9040901 Invalid hash mode
B9040902 Invalid length
B9040903 Invalid parameter
B9040904 Cannot allocate memory
B9040Axx module ECA
B9040A01 can't alloc memory
B9040A02 not supported
B9040A03 bad parameter
B9040A04 curve not found
B9040A05 curve already registered
B9040A06 input number too big
B9040A07 infinite result
B9040A08 incompatible precalculated point
B9040A09 bad length of argument
B9040A0A bad tag of point
B9040A0B no square root found
B9040A0C non-residue could not be found
B9040A0D no ASN.1 module found
B9040A0E error decoding ASN.1 EC domain parameter
B9040A0F bad value of EC point
B9040A10 bad value of EC domain parameter
B9040A11 EC domain parameters differ
B9040A12 invalid domain parameter
B9040Bxx module ECDSA
B9040B01 cannot allocate memory
B9040B02 null component in signature (r,s)
B9040B03 value for flags is invalid
B9040B04 private and public key do not correspond
B9040B05 bad public key
B9040B06 bad private key
B9040B07 signature verification failed
B9040B08 bad format of signature
B9040B09 no ASN.1 module loaded
B9040B0A buffer for result is to small
B9040B0B malformed ASN.1 coded key pair
B9040Cxx module DSA
B9040C01 prime P is too small
B9040C02 prime Q is too small
B9040C03 domain parameter generation failed
B9040C04 invalid generator value G
B9040C05 bad primes P and Q
B9040C06 hash value too long
B9040C07 private and public key do not correspond
B9040C08 invalid parameter
B9040C09 bad public key
B9040C0A bad private key
B9040C0B signature verification failed
B9040C0C bad format of signature
B9040C0D buffer for result is to small
B9040Dxx PK module
B9040D01 invalid parameter
B9040D02 memory allocation failed
B9040D03 unknown distinguished name type
B9040D04 invalid distinguished name (value or length)
B9040D05 invalid time format
B9040D06 unknown / unsupported key type
B9040D07 unknown / unsupported signature algorithm
B9040D08 unknown / unsupported hash algorithm
B9040D09 invalid / unsupported version
B9040D0A unknown / unsupported PKCS7 content type
B9040D0B no PKCS7 version found
B9040D0C unknown PKCS7 element type
B9040D0D element type SIGNATURE not found
B9040D0E element type ENVELOPED not found
B9040D0F element type CERT not found
B9040D10 element type AUTH_ATT not found
B9040D11 element type UNAUTH_ATT not found
B9040D12 element type SIG_TIME not found
B9040D13 element type DATA not found
B9040D14 no signer certificate given
B9040D15 no data or hash given to perform sign / verify operation
B9040D16 invalid PKCS7 content type
B9040D17 no digest algorithm in PKCS7 data found
B9040D18 no signer info found
B9040D19 no issuer / serial number found
B9040D1A number of PK_P7_ELEM too small
B9040D1B invalid signer reference
B9040D1C content type is not SignedData
B9040D1D content type is not Enveloped
B9040D1E digestEncryptionAlgorithm doesn't match signer certificate key type
B9040D1F signature verification failed
B9040D20 no recipient certificate given
B9040D21 unknown / unsupported encryption key type
B9040D22 multiple recipients not supported
B9040D23 given certificate doesn't match certificate in PKCS7 structure
B9040D24 given key doesn't match key encryption algorithm
B9040D25 no key encryption algorithm identifier found
B9040D26 no content type found
B9040D27 no content encryption algorithm identifier found
B9040D28 invalid attribute structure
B9040D29 given buffer / struct doesn't contain enough space for this operation
B9040D30 Unable to retrieve system time / convert time;
B9040D31 unknown attribute type
B9040D32 CRL issuer doesn't match certificate's subject / issuer
B9040D33 requested attribute not available (optional)
B9040D34 bad CRL format
B9040D35 CRL is not yet valid
B9040D36 partial CRL verification not initialized
B9040D40 unsupported time format
B9040D41 given time format contains century < 1900
B9040D42 indefinite length not supported
B9040D50 invalid signer / invalid signer information
B9040D51 invalid signer structure (ASN.1 error)
B9040Exx crypt module
B9040E01 Old Crypt Version
B905xxxx Serial Driver
B9050001 too many lines open
B9050002 error setting line parameters
B9050003 can't open device
B9050004 handle not open
B9050005 invalid handle
B9050006 invalid parameter value
B9050007 invalid parameter type
B9050008 error on read
B9050009 timeout on read
B905000A error on write
B905000B timeout on write
B905000C error on ioctl
B9050010 no valid device name
B9050011 no valid Buffer selected
B9050012 line state parameter incorrect
B9050013 line select parameter incorrect
B9050014 error in communication driver
B9050015 Parity Error
B9050016 Frame Error
B9050017 Flush failed
B9050018 EOF on read
B906xxxx CryptoServer admin library
B9060001 malloc() failed
B9060002 malformed PIN-Pad application list
B9061xxx Key file tools
B9061001 memory allocation failed
B9061002 Key Structure has not been initialized
B9061003 unable to open Keyfile
B9061004 unknown Type of Keyfile
B9061005 Error reading Keyfile
B9061006 Error writing Keyfile
B9061007 Wrong Keyfile Format in .tok file
B9061008 Wrong Keyfile Format in .key file
B9061009 Wrong File Name
B906100A invalid Key Source (file or smartcard)
B906100B invalid Key Type (private or public)
B906100C invalid Data Length
B906100D invalid Key Length
B906100E can't decrypt keyfile
B906100F no get_pass function specified (or twice)
B9061012 invalid parameter
B9061013 function not supported
B9062xxx Bootloader Command Interface
B9062001 Error calculating Hash with SHA1
B9062002 error executing RSA
B9062003 no random value present
B9062004 invalid parameter
B9062005 invalid key format
B9062006 file open error
B9062007 file read error
B9062008 memory allocation error
B9062009 response error from Cryptoserver
B906200A Module Name Syntax incorrect
B906200B Wrong Response Length from CS2
B906200C file does not exist
B906200D unable to convert time
B906200E invalid key size
B906200F no external erase prevailing
B9063xxx Admin Module Command Interface
B9063001 invalid Parameter
B9063002 File Name Syntax incorrect
B9063003 File Open Error
B9063004 File Read Error
B9063005 File Path incorrect
B9063006 Memory Allocation Error
B9063007 wrong response length from CS2
B9063008 file does not exist
B9063009 unknown battery state
B906300A unable to convert time
B906300B malformed audit log file
B906300C no external erase prevailing
B906300D struct version mismatch (binary length)
B906300E invalid number of arguments returning
B906300F file not suitable for cryptoserver model
B9063010 File Write Error
B9063011 The key was not found
B9063012 wrong response value from CS2
B9064xxx MMC / MTC tools
B9064001 Memory Allocation Error
B9064002 unable to open file
B9064003 Error reading file
B9064004 Error writing file
B9064005 unknown file type
B9064006 invalid encryption mode
B9064007 Module does not contain mdl_info
B9064008 Error reading mmc-header
B9064009 Error reading mtc-header
B906400A key length isn't divisible by 8
B906400B Error executing DES Decryption
B906400C Error executing DES Encryption
B906400D Error executing SHA1 Hash
B906400E invalid Hash algo
B906400F invalid Signature Key
B9064010 Null Pointer in Parameter
B9064011 Container is without Signature
B9064012 MTC is without Signature Info
B9064013 invalid MMC header
B9064014 invalid MTC header
B9064015 invalid signature header
B9064016 encryption not supported
B9064017 unknown target CPU of Module
B9064018 firmware decryption key required
B9064019 error decrypting firmware module
B906401A invalid sign type
B906401B write operation with zero data blocks
B9064020 invalid signature algo
B9064021 calculated Hash doesn't match with decrypted Hash
B9064022 invalid RSA Modulus to en-/decrypt signature
B9064023 invalid RSA Public Exponent to decrypt signature
B9064024 invalid RSA Modulus Exponent to encrypt signature
B9064025 Error RSA-decryption signature
B9064026 Error RSA-encrypting signature
B9064027 Error reading header of signature
B9064028 invalid hash algo for signature
B9064029 invalid Key Length
B906402A invalid block type
B906402B invalid pkcs#1 format
B906402C bad hash value
B906402D unknown target hardware of Module
B906402E cannot sign an already signed SCF file
B9064040 parsing error in licence file
B9064041 not a licence file
B9064050 package archive contains no files
B9066xxx Authentication / Session layer
B9066001 Bad user name
B9066002 malloc failed
B9066003 bad user list returned from CS2
B9066004 bad length of answer from CS2
B9066006 specified keysize does not match smartcard
B9066008 invalid parameter
B9066009 user already exists
B906600A file already exists
B906600B file open error
B906600C file read error
B906600D file write error
B906600E bad user backup data
B906600F at least one user has been skipped
B9066010 long username not supported
B9066011 function not supported
B9066012 unknown hash algorithm
B9066013 only CRT sign supported
B9066014 illegal SM mechanism
B9066015 error decrypting session key
B9066016 buffer too small for signature
B9066017 too many concurrent SC authentications
B9066018 no public key found on smartcard
B9066019 illegal SM mode
B906601A CryptoServer's signature could not be verified
B906601B illegal format in auth keys file
B906601C auth keys file does not contain key for this CryptoServer
B906601D handshake: no common mechanism
B906601E handshake: no common domain parameter
B906601F handshake not authenticated with requested mechanism
B9066020 invalid certificate chain
B9067xxx CSL Command Interface
B9067001 invalid record length returned
B9067002 memory allocation error
B9067003 invalid data length returned
B9067004 password encryption failed
B9067005 invalid parameter
B9067006 buffer size too small
B9067007 invalid answer data
B9068xxx PKG Command Interface
B9068001 accessing directory failed
B9068002 filename too long
B9068003 open file failed
B9068004 read file failed
B9068005 write file failed/
B9068006 memory allocation failed
B9068007 directory contains no files
B9068008 invalid package file
B9068009 invalid package name
B906800A directory already exists
B906800B creating directory failed
B906800C Invalid parameter
B906800D No key specifier given
B906800E Invalid SingedLicenseFile name
B9068010 Possible loop in state machine detected
B9068011 Load file failed
B9068012 different module names with the same id /abbrev - config mismatch
B9068013 could not start firmware module(s)
B9068014 CryptoServer firmware module(s) differs from archive content
B9068015 Given flag forbids to perform a BLClear
B9068016 base firmware is missing / incomplete
B9068017 firmware module not contained in archive
B9068018 firmware module is contained in archive but with different CPU type
B9068019 CryptoServer in alarm state
B906801A cryptoserver remains in an undefined state
B906801B creating temporary directory failed
B906801C old CryptoServer SDK version not supported
B906801D verification of firmware package failed
B9068020 bad auth/sm parameter
B9068021 bad session
B9068022 illegal flag parameter
B9068023 package loader <--> CryptoServer model mismatch
B9069xxx MBK tools
B9069001 bad pkcs1 format
B9069002 buffer size too small
B9069003 invalid response length
B9069004 memory allocation failed
B9069005 unable to open file
B9069006 invalid file format
B9069007 invalid parameter
B9069008 aborted by user
B9069009 invalid answer data
B906900A invalid key length
B906900B no password given
B906900C no session
B906900D invalid MBK slot
B906900E invalid key name length (max. 8 characters)
B906900F invalid password length (min. 6 characters)
B9069010 smartcard responds error
B9069011 record not found
B9069012 file not found
B9069013 access denied
B9069014 secure messaging failed
B9069015 invalid record length
B9069016 password verification failed
B9069017 smartcard is locked
B9069018 bad pin repetition
B9069019 null pin still active
B906902x invalid pin
B906Axxx cs2adm smartcard tools
B906A001 memory allocation failed
B906A002 bad device name
B906A003 too many open handles
B906A004 requested smc_id already in use
B906A005 channel is not open
B906A006 invalid data length
B906A007 buffer size too small
B906A008 smartcard is locked
B906A009 bad response from smartcard
B906A00A unknown smartcard or applet cannot be selected
B906A00B function not supported for given cardtype
B906A00C function not supported for given cardtype
B906A00D bad parameter given
B906A00E login condition for this function not supplied
B906A00F keylength not suitable for given card
B906A010 invalid PIN length
B906A011 PIN file doesn't exist
B906A012 Null-PIN is still active
B906A01C PIN is invalid, no tries left
B906A01D PIN is invalid, 1 try left
B906A01E PIN is invalid, 2 tries left
B906A01F PIN is invalid, 3 or more tries left
B906A020 bad data from backup card
B906A021 more keyhalfs given than existing
B906A022 bad data structure on Siemens CardOS card
B906Bxxx NTP Module Command Interface
B906B001 invalid Parameter
B906B002 wrong response length from CS2
B906B003 unable to convert time
B906C001 there are no database entries in the given file
B906Dxxx MXC Command Interface
B906D001 Unable to open file
B906Exxx CSXLIB User Management Interface
B906E001 permission denied
B906E002 logged in users cannot be deleted or overwritten
B906Fxxx Clone Database Command Interface
B906F002 incorrect structure of backup file
B906F003 unable to open backup file
B906F004 memory allocation failed
B906F005 incorrect length of backup file
B906F006 cannot find search_key1
B906F007 cannot find search_key2
B906F008 invalid length of snippet
B906F009 cannot call database backup function on firmware (try to use software version that matches the firmware version)
B9071xxx Utility PIN and Password Functions
B9071001 NULL passphrase
B9071002 passphrase repetition wrong
B9071003 buffer too short
B9072xxx Configuration parsing
B9072001 Error reading file
B9072002 Malformed section header
B9072003 Malformed k-v line
B9073xxx File tools
B9073001 File not found
B9073002 File Open Error
B9073003 File Read Error
B9073004 File Write Error
B9073005 Memory Allocation Error
B9074xxx Time Functions
B9074001 File Open Error
B9074010 Wrong Time Format YYYYMMDDHHMMSS
B9074012 invalid parameter
B9075xxx IPC shared memory
B9075001 Memory corruption
B9075002 Cannot allocate memory on heap
B9075003 Cannot allocate chunk
B9075004 Invalid parameter
B9075005 Memory in use
B9075006 Named shared memory object cannot be opened
B9076xxx syscall failed
B9077xxx Unable to initialize mutex
B90Axxxx CSLAN
B90A01xx CSLAN Control Module
B90A0101 wrong parameter
B90A0102 system call failure
B90A0103 wrong permission for file operations
B90A0104 no relation between port and cs device
B90A0105 no such file
B90A0106 length mismatch for vchar parameter
B90A0107 operation aborted because cs has been reset
B90A0108 authentication failed
B90A0109 memory allocation failed
B90A010A no serial number available
B90A010B CryptoServer is locked
B90A010C CryptoServer is already locked
B90A010D CryptoServer lock denied (on loadbalancing ports)
B90A010E No space left on device for this operation
B90A010F To many routes for the state device(s)
B90A0120 ksapi compatibility listener not found
B90A0121 nonexistent subfunction code
B90A0122 could not retrieve IPMI values
B90A0201 illegal configuration file
B90A0301 queue full
B90A0302 no cryptoserver online
B90A0303 mismatch between real packet length and data length
B90A0304 connection table full
B90A0305 ksapi compatibility mapping not found
B90Bxxxx csadm tool
B90B0001 memory allocation failed
B90B0002 NULL passphrase
B90B0003 passphrase repetition wrong
B90B0004 buffer size too small
B90B0005 unexpected authentication method
B90B0010 invalid number of arguments
B90B0011 invalid argument format
B90B0012 aborted by user
B90B0013 invalid argument length
B90B0014 invalid response length
B90B0015 invalid response data
B90B0020 invalid number of key parts
B90B0021 NULL pointer
B90B0022 illegal key type (algorithm)
B90B0023 file must not be empty
B90Cxxxx CSXAPI
B90C0001 memory allocation failed
B90C0002 invalid data length
B90C0003 invalid response length
B90C0004 buffer size too small
B90C0005 invalid parameter value
B90C0006 maximum number of cached pins reached
B90C0007 invalid session
B90C0008 connection or session error, session must be closed
B90C0020 HSM auth key type not supported
B90C0021 HSM auth key mode not supported
B90C01xx Cluster API
B90C0101 unable to open any device
B90C0102 unable to logon to any device
B90C0103 unable to execute command on any device
B90C0104 unknown device name
B90C0105 invalid connection parameter
B90C0106 handle still in use
B90C1xxx windows system error
B90C2xxx unix system error
B90Exxxx Simple Database library
B90E0001 memory allocation failed
B90E0002 database file does not exist
B90E0003 record not found
B90E0004 record already exists
B90E0005 corrupted database file
B90E0006 bad database handle
B90E0007 bad info structure
B90E0008 bad data length
B90E000A invalid file name
B90E1xxx open failed
B90E2xxx creat failed
B90E3xxx lseek failed
B90E4xxx read failed
B90E5xxx write failed
B90E6xxx creating mutex failed
B90E7xxx locking mutex failed
B90E8xxx locking file failed
B912xxxx Host Service Daemon
B9120001 memory allocation error
B9120002 error on WSAStartup
B9120003 error on WSACleanup
B9120004 err creating mutex
B9120005 error creating socket
B9120006 socket creating error
B9120007 timeout
B9120008 connection was terminated
B9120009 invalid cmds data length
B912000A invalid cmds header length
B912000B invalid argument
B912000C binding socket failed
B912000D listen failed
B912000E setsockopt failed
B912000F bad configuration
B9120010 protocol error
B9120011 unable to load auxiliary library
B9120012 unable to create mutex
B9120013 unable to lock mutex
B9120014 unable to unlock mutex
B9120015 timeout while trying to lock mutex
B9121xxx select error
B9122xxx receive error
B9123xxx send error
B9124xxx control module
B9124001 wrong subfunction code
B9124002 bad control command
B9124003 authentication failed
B9124004 bad CryptoServer answer
B9125xxx init failed
B916xxxx Host API CTS - Crypto Timestamp
B9164001 Environment variable CRYPTOSERVER not set
B9164002 Environment variable CRYPTOSERVER not configured for TCP
B9164003 Incorrect function arguments given
B9164004 Error occurred while encoding the timestamp request
B9164005 Given input buffer is too small to copy encoded data
B9164006 Incorrect data received from TimestampServer
B9164007 Error returned from the TimestampServer
B9164008 Cannot open file
B9164009 given data is not pkcs7 encoded
B916400A only signed and signedAndEnveloped PKCS7 types supported
B916400B given data contains more than one certificate
B916400C given data contains no certificate
B916400D given data contains no plain certificate
B916400E Given TimeStamp structure is not a valid ASN.1 format
B916400F Unsupported hash algorithm
B9164010 Calculated hash value does not match with the hash value contained in the TimeStamp
B9164011 given memory buffer too small or invalid length returned from the CSLAN
B9164012 can't allocate memory
B9164013 Error while reading/writing PKCS7 data
B9164014 Given timestamp contains no timestamp token (maybe error in request?)
B9164015 invalid hash length
B9164016 invalid http response
B9164100 tcp: init error
B9164101 tcp: incorrect IP address
B9164102 tcp: incorrect hostname
B9164103 tcp: incorrect port number
B9164104 tcp: connection timeout
B9164105 tcp: connection closed by remote host
B91642xx tcp: can't create socket
B91643xx tcp: can't get connection
B91644xx tcp: recv error
B91645xx tcp: send error
B91646xx tcp: select error
B9164800 HTTP error
B9164990 HTTP error 400: Bad Request
B9164993 HTTP error 403: Forbidden
B9164994 HTTP error 404: Not Found
B9164995 HTTP error 405: Method not allowed
B91649F4 HTTP error 500: Server error
B91649F7 HTTP error 503: Service unavailable
B917xxxx CryptoServer Protocol Daemon
B9170001 memory allocation error
B9170002 invalid parameter
B9170003 bad configuration
B9170004 can't open any device
B9170005 timeout
B9170006 connection was terminated
B9170007 invalid command data length
B9170008 protocol error
B9170009 maximum number of connections reached
B917000A can't open file
B917000B buffer size too small
B917001x mutex section
B9170012 unable to create mutex
B9170013 timeout while trying to lock mutex
B9170014 unable to lock mutex
B9170015 attempt to lock mutex timed out
B9170016 unable to unlock mutex
B917002x control module
B9170021 wrong subfunction code
B9170022 bad control command
B9170023 authentication failed
B9170024 bad CryptoServer answer
B9170025 invalid parameter
B9170026 permission denied
B9171xxx TCP error
B9172xxx system error
B918xxxx PINPad Daemon
B9180001 memory allocation error
B9180002 invalid parameter
B9180003 bad configuration
B9180004 can't open any device
B9180005 timeout
B9180006 connection was terminated
B9180007 invalid command data length
B9180008 protocol error
B9180009 maximum number of connections reached
B918000A can't open file
B918000B buffer size too small
B918000C authentication failed
B9180010 invalid command length
B9180011 invalid function code
B9180012 invalid sub-function code
B918002x mutex section
B9180022 unable to create mutex
B9180023 timeout while trying to lock mutex
B9180024 unable to lock mutex
B9180025 attempt to lock mutex timed out
B9180026 unable to unlock mutex
B9181xxx TCP error
B9182xxx system error
B91Dxxxx PIN pad API
B91D0001 memory allocation failed
B91D0002 invalid PIN pad type
B91D0003 no device found
B91D0004 bad device name
B91D0005 too may open connections
B91D0006 bad handle
B91D0007 invalid parameter
B91D0008 requested feature is not supported
B91D0009 connection is not open
B91D000A timeout occurred
B91D000B action canceled
B91D000C invalid data length
B91D000D bad PIN repetition
B91D000E invalid buffer size
B91D000F protocol error
B91D0010 bad ICC state
B91D0011 bad data length returned from ICC
B91D0012 bad response received from ICC
B91D0013 no smartcard inserted
B91D0020 USB driver is not running
B91D0021 USB open failed
B91D0022 USB write failed
B91D0023 USB read failed
B91D0024 USB is not available
B91D0030 bad input
B91D0031 access denied
B91D0032 no reader connected
B91D0041 JCOP simulator send/receive timeout
B91D0044 JCOP simulator unknown error
B91D1xxx PC/SC
B91D2xxx MKT
B91D3xxx CP8
B91D4xxx ACR80
B91D5xxx USB
B91D6xxx CCID
B91D7xxx cyberJack
B91D8xxx JCOP
B91Exxxx copa Config Parser
B91E0000 Cannot open configuration file
B91E0100 line from input file to long
B91E0101 No matching bracket found
B91E0102 No = after variable found
B91E0103 No value for variable after = found
B91E0104 No Matching \" or' found
B91E0105 No valid Hex Number after $
B91E0106 not all hex codes are two byte
B91E0107 No Value in List found
B91E0108 second char after $ is no valid hex value
B91E0109 One of the list elements it not in the config file
B91E0110 One of the config file elements it not in the list
B91E0111 Value is not a Boolean value
B91E0112 Value is not an Integer number
B91E0113 Char in String is non printable
B91E0114 strol returns long, the result does not fit in int
B91E0115 strol returns variable is out of range
B920xxxx CryptoServer Core API Cxi
B9200001 memory allocation failed
B9200002 invalid parameter
B9200003 invalid parameter length
B9200004 parameter out of range
B9200005 buffer size too small
B9200006 invalid answer length
B9200007 invalid format of answer data
B9200008 unterminated string
B9200009 string conversion failed
B920000A object/item not found
B920000B compare failed
B920000C invalid algorithm
B920000D invalid state
B920000E file error
B920000F user does not exist
B9200010 operation not supported
B9200011 invalid key
B9200012 I/O error
B9200013 log access error
B9200014 database access error
B9200015 invalid ASN.1 format
B9200016 memory corruption
B9200017 invalid number of mechs
B9200018 permission denied
B9201xxx system error
B921xxxx OS test tool
B9210001 memory allocation failed
B9210002 invalid parameter
B9210003 invalid length of answer data
B9210004 actual error doesn't match expected error
B9210005 data compare error
B9210006 file error
B9210007 value exceeds expected range
B9210008 insufficient buffer size
B9210009 memory corruption
B9211xxx System error
B923xxxx certificate parsing library
B9230001 memory allocation failed
B9230002 invalid parameter
B9230003 buffer size too small
B9230004 operation not supported
B9230005 object/item not found
B9230006 invalid algorithm
B9230007 input error
B9230008 invalid attribute type
B9230009 error at end of config line or file
B923000A a value is missing
B923000B illegal character
B923000C DN must not be empty
B923000D Error in email address
B923000E Country name must be 2 upper case characters
B923000F Country name may appear only once in DN
B9230010 Common name must not be empty
B980xxxx java CryptoServer API
B9800001 Connection terminated by remote host
B9800002 Bad block length received
B9800003 Bad answer length
B9800004 Bad tag of answer block
B9800005 Too many authentications
B9800006 Bad length of password
B9800007 Can't translate user name
B9800008 Hash algo not available
B9800009 Could not get challenge
B980000A JCE Provider not found
B980000B JCE Key Exception (Jurisdiction files installed?)
B980000C JCE Exception
B980000D Secure Messaging failed
B980000E Unknown SM mode
B980000F Bad session key decryption
B9800010 JNI Interface Error
B9800011 Bad parameter
B9800012 Missing authentication
B9800013 Unsupported encoding
B9800014 Invalid data length
B9800015 Can't decrypt key file
B9800016 I/O Error
B9800017 No device specified
B9800018 Invalid authentication mechanism
B980002x CryptoServer Cluster API
B9800021 Unable to open any CryptoServer
B9800022 Unable to logon to any CryptoServer
B9800023 Unable to execute command on any CryptoServer
B98003xx CryptoServer Database API
B9800300 JNI Interface Error
B981xxxx Java CryptoServer API CXI
B9810000 invalid parameter
B9810001 bad key name
B9810002 key name required for internal storage
B9810003 internal charset converting error
B9810004 bad key token
B9810005 malformed answer block of CryptoServer
B9810006 bad key attributes from CryptoServer
B9810007 bad algorithm
B9810008 bad user name
B9810009 missing device entry
B981000A key component not found
B981000B key not found
B981000C version of CryptoServerAPI too small
B981000D no EC parameter data available
B981000E no output IV available
B981000F firmware version too small
B9810010 ASN.1 decoding error
B9810011 JCE AES decrypt error
B9810012 item not found
B9810020 bad ECC parameter
B9810030 config item missing
B9810040 invalid data length
B9810050 invalid number of mechs
B984xxxx JCA/JCE provider
B9840002 KeyStorePath
B987xxxx kuu tool.
B9870001 bad parameter
B9870002 buffer is not big enough
B9870003 NULL passphrase
B9870004 passphrase repetition wrong
B9870005 Cannot open a file
B9870006 Cannot do file operation (for example: seeking the file failed)
B9870007 Cannot write data into a file
B9870008 Cannot read data off a file
B9870009 Failed to allocate memory
B987000A Answer from module is malformed
B987000B Overflow or underflow
B987000C Too many '-a, --auth' parameters.
B987000D Internal error
B987000E Unknown command
B987000F A Parameter was given more than once.
B9870010 Command version not matching
B9870011 Password too short
B9870012 Script name too long
B9870013 Database modified during backup/restore
B9870014 Bad backup file format (or file corrupted)
B9870015 Backup file integrity check failed
B9870016 Backup file has an unknown structure/version
B9870017 The firmware encryption key is too short
B988xxxx CXITOOL
B9880001 the function only supports RSA and EC keys
B9880002 Multiple parameters were defined, but only one allowed.
BA018xxx Test Utility Library
BA018001 memory allocation failed
BA018002 invalid parameter
BA018003 report file is not open
